SCANIA R560 V8 XT Arrives In Labuan For Kiong Ngee Engineering
Scania has recently handed over the first Scania R560 V8 Heavy Haulage XT (XT) in Labuan to Kiong Ngee Engineering Sdn. Bhd. (Kiong Ngee).
The key to this XT that is safe, comfortable, fuel-efficient and reduces CO2 emission, was handed over by Bonnie Anjun, Solution Sales Executive, Scania Southeast Asia to Su Puong Ping – Managing Director of Kiong Ngee. Celebrating the handover were also, Sii Sii Kuok – Director of Kiong Ngee Transportation, Su See Bing, Manager and Wong Kiong Hock, Account Executive, both from Kiong Ngee Engineering, and Frankie S. S. Su and Fadric Lo, Directors of Sea Lane Shipping Sdn Bhd.
This magnificent XT that has been approved to carry loads of up to 220 tonnes comes complete with a Repair & Maintenance contract, 24/7 Scania Assistance service and Scania Fleet Management System Monitoring Package.
This XT comes fitted with the standard safety features such as the technologically advanced Electronic Braking System (EBS), the Anti-Lock Braking System (ABS) with traction control, Hill hold to avoid the XT from moving when stopping on hilly roads, and Daytime Running Light (DRL) for better visibility.
The large windscreen with extended view will make it easier for the driver to operate in a safe and comfortable environment. In addition, the adjustable seat that is close to the door enables easy access while the ergonomic dashboard, 7-inch touch screen monitor for ease of operation, additional overhead storage, and a sleeper in the cabin for resting between hauls makes the XT a home away from home.
The XT is also designed and engineered to give Kiong Ngee better fuel efficiency and lower CO2 emissions as it is equipped with advanced powertrain and aerodynamic solutions that gives up to 3% improved fuel economy.
The powerful Scania V8 engine together with the Scania Opti-cruise gearbox and a rear axle gear adapted for cruising on direct drive can give further fuel-savings of up to six percent. The wide gear ratio spread makes it possible to optimise the rear axle gear for low engine rpm in cruising speed, without compromising start-ability.
This gives a high performing powertrain for a profitable and more sustainable business. The pre-set Economy Mode with Opti-cruise saves even more fuel.
The toughness of the XT stands ready to take on the toughest challenges. The XT steel bumper provides excellent protection for the components at the front of the vehicle, reducing unwanted downtime and costly cab and chassis repairs while improving mobility with its larger attack angle.
Also fitted with headlamp protection and integrated fog lamps in the bumper for driving in rough surroundings. The towing pin at the front provides a 40-tonne towing capacity, the strongest on the market. The robust XT mirrors have a rugged, patterned surface that is scratch-resistant, helping the mirrors retain their high quality over time.
“Investing in the powerful Scania R560 V8 XT is by far the best business decision that I have made among all my truck purchases so far. With an approved load of 220 tonnes, my R560 is capable to move the oil & gas machinery and equipment around Labuan with ease.
The V8 engine is incredibly powerful and is by far the most powerful prime mover in Labuan. I am really proud to own this beast that gives me the prestige and the competitive edge to secure this niche business.
I am amazed that such a powerful truck can still give me the fuel economy and keep my operating costs down maintaining its sustainability and increased profitability. The Repair & Maintenance contract, 24/7 Scania Assistance service and Scania Fleet Management System Monitoring Package ensures my R560 stays on the road,” stated Su Puong Ping.
Established in 1996, Kiong Ngee Engineering Sdn Bhd started with construction and evolved into shipping, forwarding in Labuan.
Aspired by their ambition to be a one-stop shop in the logistic business, Kiong Ngee began to invest in trailers, cranes, side-loaders and forklifts for heavy equipment rental, and finally into heavy haulage when demand for it was evident.
Other businesses include property development, hardware supplies, supply/rental of container/cabin and even hotel services for the business travellers.
Presently, Kiong Ngee is the main supplier for crane lifting and heavy haulage transportation for the oil and gas industry players in Labuan.
Warehousing is another field that Kiong Ngee is aggressively active in with about 500,000 sq feet available for long and short-term rental. Transportation with door-to-door services. Apart from Labuan, Kiong Ngee have offices in Kota Kinabalu, Bintulu, Miri and Brunei where marketing of its range of services are carried out.
“Congratulations to Kiong Ngee for being the first in Labuan to invest in the powerful Scania R560 V8 XT. We would like to give Kiong Ngee the assurance that its investment is not only in the truck but the support from the whole Scania infrastructure that includes the best in customer service advice in terms of running a more sustainable and profitable business.
We will be glad to offer any total solution services that is custom fitted for Kiong Ngee and required to expedite its growth in these areas,” stressed Heba El Tarifi, Managing Director, Scania Southeast Asia.
For more detailed information on the reliability and powerful V8 Scania engine, the toughness of the Scania XT and the total solutions services that can improve your business sustainability and give you better profitability please contact 03-7845 1000, email at [email protected], visit scania.com.my or visit the nearest Scania Malaysia Sales and Services Centre and talk to our Total Solutions Executives for further details.