Used cars

Published on October 2nd, 2021 | by Joshua Chin

0

Lamborghini Has Reconstructed Its Original Countach LP500

It took 25,000 hours for Lamborghini to recreate the first ever Countach from scratch. 

When Lamborghini celebrated the 50th anniversary of its Countach this year, many fans of the raging bull were left somewhat wanting when the Italian supercar marque unveiled what was in essence a tarted up Aventador to mark five decades of arguably its most iconic model. 

Happily however, there was actually more in store for this most flamboyant of raging bull’s 50th birthday. That is as alongside its aforementioned modern day reinterpretation, Lamborghini has also recently revealed a picture perfect reconstruction of the first ever Countach. 

Just for those not up to their Lamborghini lore, what is dubbed the LP 500 was the concept Countach that was first shown off to a stunned public at the 1971 Geneva Motor Show. This prototype however had sadly lived a harder life than most other show cars, with it eventually being sacrificed in a crash test just three years later for the development of its road-going production counterparts. 

Thanks to ‘an important Lamborghini customer’ though, the very first Countach to ever be produced now lives on again (in spirit at least) with this reconstructed replica seen here. 

A project that first began back at the tail end of 2017, Lamborghini’s Polo Storico in-house restoration arm estimates that over 25,000 hours went into recreating this Geneva show car from scratch. And 2,000 of those work hours was apparently going into finalising the distinct lines of the Countach concept alone, using a mixture of images, homologation sheets, in addition to a 3D scan of the first production LP400 Countach being used as reference to get that Gandini-penned wedge-shaped skin — resplendent in the concept Countach exclusive Giallo Fly Speciale — looking just so.  

Now as for what lies under said hand-beaten skin meanwhile, this LP500 reconstruction also follows faithfully by featuring same the unique tubular frame as the original concept. Found sitting snugly in the middle too is naturally an original-spec V12 engine, which has been built up using a mixture of spare, restored or completely prefabricated parts. 

In terms of attention to originality however, the aspect that is most deserved of being highlighted here is its Cinturato CN12 tyres found adorning the 14-inch rims of this Countach. A one-off set recreated especially for this project by Pirelli, these rubber donuts feature the same tread pattern and aesthetics as the original set from the ’70s show car, but utilise a modern compound and structure. 

Making its public debut this weekend as an entry to the concept class of Italy’s Concorso d’Eleganza Villa d’Este, this Countach concept reconstruction is certainly to turn as many heads now as it did 50 years ago. Let’s just hope though that this particular replica will survive a whole lot longer than the short three-year lifespan of the original car. 

PRESS RELEASE: The Countach LP 500 has returned, entered in the class reserved for concept cars at the Concorso d’Eleganza Villa d’Este. It is a passionate reconstruction carried out by Automobili Lamborghini’s Polo Storico that required over 25,000 hours of work on behalf of an important collector. The contribution of the Lamborghini Centro Stile was fundamental in the reconstruction of the bodywork and supervision of the styling.

“The Countach reinvented high-performance cars,” said Stephan Winkelmann, Chairman and CEO of Automobili Lamborghini, “and it became an icon in terms of stylistic language that even today, after decades, still inspires contemporary Lamborghinis. Bringing the reconstruction of the first Countach to the concept class of the Concorso d’Eleganza Villa d’Este, in the year we are celebrating the 50th anniversary of this model, is something extraordinary because it allows us to admire the legendary 1971 LP 500 in person for the first time in so many years.”

At the Geneva Motor Show in March 1971, Automobili Lamborghini presented its “idea car”, the LP 500 Countach. The car immediately became the star of the show, and the photographs of it, which went viral, were published in major magazines around the world. This new model was conceived to replace the legendary Miura and wrote a new page in the history of the automobile, both for its technology and design. After three years of development, the LP 500 was sacrificed in crash tests in March 1974 and then disappeared.

At the end of 2017, a classic car aficionado and important Lamborghini customer asked Polo Storico if there was any possibility of creating a reconstruction of the Countach LP 500, a legendary model known only through photographs of the time.

The first months were spent acquiring all the material available and undertaking an in-depth analysis. “The collection of documents was crucial,” underscored Giuliano Cassataro, Head of Service and Polo Storico. “There had been so much attention paid to all the details of the car, to their overall consistency and to the technical specifications.” Photographs, documents, meeting reports, original drawings, and the memories of some the protagonists of the time: all this contributed to establishing the form and function of every single detail as accurately as possible. The support of Fondazione Pirelli was also fundamental in providing historical archive material to recreate the tires mounted on the original LP500 model.

The work began on the platform chassis, completely different from the tubular frame of the Countach models that would follow. In addition to physically redesigning it, Polo Storico had to decide which work system to use for building it in order to respect the production methods of the time. The same procedure was used for the bodywork, with various modern technological instruments employed for its analysis and definition. Once the sheet metal beating phase was reached, technology gave way to the traditional Italian system, carried out by the “battilastra” with his creativity and tools. A similar process was followed for the interior, which included the lighted diagnostic instruments, as shown on the 1971 prototype.

For all the mechanical components, as in 1971, original Lamborghini spare parts or restored components of the time were used, or failing that, parts were completely rebuilt.

For the historical reconstruction part of the original design, Polo Storico turned to the Lamborghini Centro Stile where the team led by Mitja Borkert, Head of Design, set to work on a very challenging project. “The LP 500 is of paramount importance to Lamborghini because it gave rise to the design DNA of all subsequent models.” said Mitja Borkert. “To arrive at the car that debuted in Geneva in 1971, a 1:1 scale styling model was developed, which along with the car itself was lost over time, but extensive photographic evidence of it remains. This is the same approach with which we decided to tackle the project. Starting from publications of the time, from images on homologation sheets and other material recovered from Polo Storico, we were able to reconstruct the mathematics necessary for creating the first 1:1 scale model. The biggest challenge was to create the exact volume of the car, and for this we used the opportunity to take a 3D scan of our LP 400 (chassis 001), which was an enormous source of information. It took us 2000 hours of work altogether to arrive at the final model, with lines that satisfied us. The exact same procedure was followed for the interior.”

The collaboration with Pirelli – in existence since 1963 – to reconstruct the tires mounted on the LP 500 prototype proved to be invaluable. Thanks to the images and materials preserved in the archives of Fondazione Pirelli, it was possible to use the original plans of the Cinturato CN12 tire fitted on the LP 500 for its Geneva debut. From these documents, the Milanese company’s technicians set out to create the Cinturato CN12 of the Pirelli Collezione range, today’s line of tires dedicated to the most iconic cars built between 1930 and 2000, which preserve the originality of the rubber by combining a vintage image with modern technology. Specifically, the Pirelli Cinturato CN12 tires for the Lamborghini Countach LP 500 were supplied in the sizes 245/60R14 for the front and 265/60R14 for the rear, and are now fitted with the same tread pattern and aesthetics as in the 1970s, but with a modern compound and structure.

When it came to choosing the color, the PPG archives proved to be crucial, making it possible to identify, after careful analysis, the exact composition for producing the yellow color used, identified as “Giallo Fly Speciale”.

Lamborghini Polo Storico

Lamborghini Polo Storico, inaugurated in 2015, is the division of Automobili Lamborghini responsible for preserving the historic identity of the company from Sant’Agata Bolognese. Its main tasks include the certification and restoration of all Lamborghini cars produced up to 2001. To this end, Polo Storico oversees the preservation and acquisition of new sources for the company archives, which makes it possible to establish and preserve the value of all classic Lamborghinis. Because of the requests made by classic Lamborghini enthusiasts, particular attention is given to producing spare parts that are no longer available on the market.

Tags: , , , , ,


About the Author

Automotive journalist. Professional work on dsf.my and automacha.com. Personal writing found at driveeveryday.me. Instagram: @driveeveryday



Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Back to Top ↑